Home / Recruiter Center / Search Candidates / Sr.Instrument and Control Engineer
17 years experience
Qualification: Bachelor's Degree
Abu Dhabi, United Arab Emirates

Candidate Description

-17 Years of exposure in Detail engineering, Design Review, Installation, Testing, Commisioning of various control systems such as DCS,SCADA,PLC,ESD, F&G,PA-GA,ACS,WHCP,CCTVetc and wide range of Electronic,Hydraulic,Pneumatic field instrumentation. -Worked as a Client,Project Management Consultant and as a EPCM

Skills and Expertise

Professional Experience-I
________________________________________
Sr. Instrumentation Engineer -PMC

Aug’ 2012 To Present Nama Mott Mac Donald,Abu Dhabi, U.A.E.
Project Management Consultancy Company (PMC)

Projects: Presently working as Sr. Instrument Engineer for Ruwais Refinery Expansion Project of TAKREER (ADNOC Group),Ruwais, Abu Dhabi, U.A.E. for Marine Facilities Project (Offshore &Onshore)

Main Responsibilities :
• Monitoring and coordination of EPC Contractor’s work and ensuring all works being executed as per the Project specification and Standards construction practices. Adherence to Contractual requirements and approved construction drawings for the Onshore and Offshore work related to marine facilities ,jetty which includes Loading Arms facilities, VRU, Chemical Injection, Navigation & Mooring system, Environmental Monitoring system etc. for following described scope of work:
Design Review, Detail engineering , Installation, Testing-FAT/SAT, Commissioning of wide range of Pneumatic, Hydraulic, electronic field Instrumentation, Different control systems(ICS,DCS( Yokogawa Centum VP & FF,ESD(Yokogawa Pro Safe RS),GDS-Yokogawa Centum VP, FAS-AB PLC ,PLC(Siemens S-400, Control Logix PLC of AB)-SCADA), CCTV, PA-GA , ACS etc.
• To co-ordinate and provide engineering expertise to ensure that the plant is designed and will function in
accordance with the Project Integrated Basis of Design and in accordance with international standards like IEC,
ISA API, NFPA, IEEE, ISO, BS, Shell DEP starting from Detail engineering (EPC Phase), commissioning till
issuance of PAC, FAC.

Professional Experience-II
________________________________________
Electrical &Instrument Superintendent-PMC

May’ 2012 To July’2012 Ch2Mhill (VECO Engineering),Abu Dhabi, U.A.E.
Project Management Consultancy Company (PMC)

Projects: Presently working as Electrical and Instrument Superintendent
for Shah Gas Development Project (SGD-Package1))-Gas Gathering System of Abu Dhabi Gas Industries Ltd/ Al Hosn Gas Company ,Abu Dhabi for their onshore/up stream project.
Main Responsibilities :
• Monitoring and coordination of EPC Contractor’s work and ensuring all works being executed as per the Project specification and Standards construction practices. Adherence to Contractual requirements and approved construction drawings for the Gas Gathering System for following described scope of work:
Design Review, Installation, Testing-FAT/SAT, Commissioning of wide range of Pneumatic, Hydraulic, electronic field Instrumentation, Different control systems, Well Head Control(WHCP) for Gas wells, CCTV, Pipeline leak detection system, ACS, Fire and Gas detection etc.
• To co-ordinate and provide engineering expertise to ensure that the plant is designed and will function in
accordance with the Project Integrated Basis of Design and in accordance with international standards like IEC,
ISA API, NFPA, IEEE, ISO, BS, Shell DEP starting from Detail engineering (EPC Phase), commissioning till
issuance of PAC, FAC.
Professional Experience-III
________________________________________
SR. Instrumentation & Control Engineer-PMC

JULY’ 2009 To April’2012 TEBODIN MIDDLE EAST LTD, ABU DHABI, U.A.E.
Project Management Consultancy Company (PMC)
(Consultants & Engineers).
Projects:1 Worked as an Instrument and Control Superintendent
for Inter Refineries Pipeline Project(IRP2) of Abu Dhabi Oil Refining Company (TAKREER)
Poject2: Successfully completed Sea Water facility Expansion Project-5624 at Abu Dhabi oil Refining Company (TAKREER),Ruwais, Abu Dhabi.
Main Responsibilities :
• Monitoring and coordination of EPC Contractor’s work and ensuring all works being executed as per the Project specification and Standards construction practices. Adherence to Contractual requirements and approved construction drawings for the IRP-2 Project of Takreer for following described scope of work:
Design Review, Installation, Testing-FAT/SAT, Commissioning of wide range of Pneumatic, Hydraulic, electronic field Instrumentation, Different control systems like ABB Infi90 DCS, ABB ICS , ABB SCADA, Plant Guard ESD, Saab Rosemount Tank Gauging system (TGS), MOV Control system, MCM, F&G System, Custody Transfer Metering skids, HPU for SV Stations, CCTV, Tank / pipe leakage detection systems etc.
To co-ordinate and provide engineering expertise to ensure that the plant is designed and will function in
accordance with the Project Integrated Basis of Design and in accordance with international standards like IEC,
ISA API, NFPA, IEEE, ISO, BS, Shell DEP starting from Detail engineering (EPC Phase), commissioning till
issuance of PAC, FAC.
• To carryout HAZOP, SIL study & to provide inputs/ recommendation.
• To review design & construction documents like P & I Diagram, I/O List, Cause & Effect Diagrams ,Functional
Design specifications (FDS)Technical Specifications, Data sheets, Instrument Index, Logic Diagram, Functional
Schematic Diagram (FSD), Electrical schematic/ wiring drawings, Graphics, Method Statements etc.
• To carry out Inspection for Inst. Installations, Cable Testing, Loop Cheking, Functional Logic test activities.
• To monitor the EPC Contractor in the execution of their responsibilities under the client EPC Contract agreement.
• To promote and comply with the Project Health, Safety and Environmental Policies and Procedures.
• To carry out Design, Detail engg /Project engg, Testing-FAT/SAT, Installation, Commissioning, Start up
activity of Field Instrumentation and Following Control systems:
1. Harmony Infi-90 ABB DCS Control System: its interfacing with existing, conversion to 800 XA System.
2. Machine Condition Monitoring system –MCM (Bentley Nevada Vibration Monitoring system-3500) & its communication to Infi-90 DCS System & with Existing Server Network
3. Allen Bradley Control logics PLC/SCADA System with Factory Talk SCADA Software for Hypo Chlorination system package & its interfacing with DCS System.
4. Siemens RTU system
5. Hydraulic Control Panel & its interface with DCS.
6. Fire & Gas Detection system & its interfacing with Existing System.
7. PA/GA System, Telephone system and its interfacing with existing node.
Primary Accountabilities:
• Lead the discipline’s input to multi-discipline PMC activities prior to Mechanical Acceptance.
• Monitor the EPC Contractor’s organization and activities related to pre-mechanical completion as they affect
Installed instrument and control systems and equipment. Highlight the concern related to safety, quality.
• Review the EPC Contractor’s procedures, plans and method statements for pre-mechanical completion
Activities, ensuring that they provide adequate information & fulfill the Project’s quality and performance needs.
• Ensure that following the completion of pre-mechanical completion activities, all instruments and control
equipment are reinstated and function as needed for permanent operations.
• On behalf of Company, inspect, verify and witness Contractor and Vendor activities as necessary. Highlight any
areas of concern & to Review test and deviation reports and concession requests for the function.
• Review on behalf of Company Mechanical Completion documentation for the function.
• Monitor the generation and resolution of punch lists ensuring that all deficiencies and outstanding work are
properly recorded within the Project completion systems and addressed by the Contractor in a timely fashion.
• Keep the Lead Instrument Engineer of company fully informed on matters related to his area of responsibility so that decisions can be made based on the best available information in a timely manner, and highlights those issues which have an impact on Project Basis of Design, cost or schedule. Provide verbal and written reports.
• Liaise with other members of the Project Team and the Instrument and Control Group to ensure that instrument design and installation is in full accordance with Project requirements & Integrated Basis of Design is met.
• Provide technical advice and input to other groups and disciplines like Safety, Process, Electrical, Mechanical, Construction, Commissioning, Operations, Procurement and Contract engineer.
• Liaise and coordinate with other Project groups engineers as required in order to ensure that all requirements of the project are met.
• Ensure full compliance with all applicable Takreer Project policies and procedures throughout the complete EPC work till issuance of PAC, FAC.
________________________________________
Professional Experience-IV
________________________________________
INSTRUMENTATION ENGINEER,

November 2007 – June’2009 KUWAIT NATIONAL PETROLEUM COMPANY (KNPC- MINA AL-AHMADI
REFINERY,KUWAIT) through M/S ATSCO(EPC Company), AHMADI,
KUWAIT.

• Job Profile:
• Major accountabilities, duties are to look after / supervise the MOIP, Phase-I Project & Maintenance /Trouble
shooting Activities of a) Kerosene Desulphurization (KD) Unit-43 , b) Gas Oil Desulphurization (GOD) Units-44 &
58 and c) Crude Distillation Units 4&5 (CDUs) d) Hydrogen Production (HP) Units-48/49 of (RMP) Area.
• Main Responsibilities :
• To carry out Instrumentation design & detail engineering activities with execution of MOIP,PHASE-I project in
Coordination with Project Team & EPC Team.
• Duties include equipment / Control system & subsystem / Field instruments selection, preparation of specifications,
detail design, site survey activities in co-ordination with project group/team.
• To Review /approve bid evaluation, vendor documents and to participate in HAZOP, SIL stusy/review.
• To prepare & review design Doc. and Functional Design specifications as per for process control & safety system.
. Primary Accountabilities:
• To Review & assist the project team for development of various Conceptual studies , basic engg. (FEED) and
Detailed Engg. (EPC) Documents , including Basis of Design, General Specifications, Data sheets, Instrument
Index, Logic &Functional Schematic Diagram (FSD), Electrical schematic/ wiring drawings, I/O List, Graphics etc.
• To Assist Design team for development of various Installation Design documents such as Layout drawings, Cable
routings, Junction box wiring, Cable List, Cable block diagrams, Bulk MTO, Hook up diagrams etc. To review /
approve these Installation design Documents.
• To lead a team of Assistant engineers, supervisors, sr. foremen, technicians to provide Engg.& project support.
• To co-ordinate project team, EPC team, Vendors & sub contractors on all Engg.& project aspects to ensure Timely
& Cost effective execution of Project.
• To carry out SAT( Site acceptance test) of different Control systems, sub systems ,local Control panels.
A) Control Systems Handled: •
• DCS: FOXBORO I/A SERIES DCS •
• ESD (TMR): Emergency Shutdown System - ICS Triplex , Triconix-Invensys •
• Vibration Monitoring System: Bentley Nevada- 3300 / 3500 series •
• Gas Detection & Control System: CROWCON & General Monitors•
• Local Control Panels in Haz. Area Locations with Pressure Purging System •
• SLC/PLC: SLC 5/03, PLC 5/30, CONTROL LOGIX OF Allen Bradley •
• Foundation Field bus based Field Instruments and Delta –V Emersion Process DCS Systems. •
• Tank gauging system (TGS) for Level and temperature measurement of storage Tanks.
B) Field Instrumentation :
• Hands on exposure with Control valves/Transfer valves, Flow elements, Field Barriers, Transmitters, Leveltrols,
Switches, Indicators, specialty instruments (Analyzers, MOVs), DCS, PLC, HMI, control panels (including
associated equipment), communications (digital, fibre) and communications protocols.
• Familiar with complete single loop design i.e. measurement, control valves/ESD cabling, marshaling, control System tie-ins, DCS/PLC/HMI configuration / programming & Familiar with associated electrical design.
Familiar with Lube oil & Seal oil system, safety interlocks& Anti-surge controller for Gas (H2) Compressors.
• Knowledge of hazardous area classifications and equipment, to include maintenance and repair.
•Comprehensive knowledge of the hazards associated with hydrocarbon systems.
• Conversant with Process Industry Practices, Engineering Codes and Standards such ISA, IEC, API, NFPA,ISO,
Shell DEP, BS etc. relevant to Instrumentation discipline.
________________________________________
Professional Experience-V________________________________________

MANAGER (AUTOMATION),
June 2007 - November 2007
HINDALCO INDUSTRIES LTD.( BIRLA COPPER UNIT), DAHEJ. BHARUCH,
GUJARAT,INDIA.

• Main Responsibilities :
• To Supervise Preventive / Break Down Maintenance Following Quality Management Systems Viz. ISO-9001:2000 ,
ISO-14001,OSHAH& WCM For following Plants Field Instruments & Control System:
• A). Sulphuric Acid Plant, B). Phosphoric Acid Plant, C). Di Ammonium phosphate (DAP) Fertilizer Plant, D). CCR
Plant, E). Refinery -1/2/3 (Electrolysis Process), F). PMR Plants, G). ALF3 Plant, H). WTP & ETP Plants •
• Primary Accountabilities:
• A) Control Systems Handled: a) DCS: CS 3000 DCS System –Yokogawa.
• b) -1)Allen Bradley SLC / PLC/SCADA:: PLC 5,SLC 5/4 ,CONTROL LOGIX5555
with necessary software's like RSLinx, RS Logix5, RS Logix500 & Rs Logix5000 and RS View RT & Rs View 32
works with DH+, Ethernet & Rs232,ControlNet communication with different types of H/W modules like Flex I/O &
Other standard input/output modules of Allen Bradley PLCs. 2) Mitsubishi & Siemens PLCs.
• B) Field Instrumentation:
• Hands on experience on selection, Testing, Calibration, Installation of different types of smart Transmitters,
Analyzers, Pneumatic/ Hydraulic systems, solenoids/valves & Bagging weighing systems/weighing scales.
• Hands on exp. of different types of Control/on-off valves including its selection/sizing through software. ________________________________________
Professional Experience-VI
________________________________________
MANAGER-INSTRUMENTATION,

March 1997 - June 2007 STERLING GELATIN ( A DIV. OF STERLING BIOTECH LTD.), VILLAGE:
KARAKHADI, PADARA, BARODA, GUJARAT, INDIA.
Main Responsibilities :
• To carry out Project Engg. /Detail-Design Engg. by assisting EPC (M/S UHDE India) & Project team for 4 Nos. of
Plants for Gelatin & Hydrolyzed Protein Plants including Captive Power plants/D. G. Sets & other utilities.
• To Supervise Preventive ,predictive & Break Down Maintenance activities Following QMS Viz. ISO-9001:2000,
HACCP,ISO-14001 For Plant Field Instruments/Control Sys. Diff .Vendor Package Equip.& Diff. Utility Equip. viz
Boilers, Chilling Compressors/ Chiller units, Instrument Air Compressors. Captive power plants.
• Primary Accountabilities:
• A) Project Role: To Support the EPC contractor's team & Project team for following Activities:
• Preparation of project specific engg. and design specifications. Input to specification and follow up of package units.
• Input to Piping and Instrument diagrams (P&IDs), Instrument Plot Plans, GA Drawings etc.
• Selection of instrument types for services & Preparation of instrument index, Enquiry Specifications, Data sheets,
Logic & Loop drawings, Functional Loop Schematics, Cable Schedule, JB details/Terminal Dwgs, TBE etc.
• Preparation of Analyzer, process control and safeguarding hardware and software specifications.
• Participation in Project review meetings, key document reviews, model reviews, close out of punch items etc.
• Technical interfaces with other disciplines-process/chemical, Mechanical, Electrical, vendors & client.
. Supervision and coordination during construction and commissioning & start up.
• B) Maintenance Role:
• To perform planned maintenance, trouble shooting, inspections, repairs and overhauls on instrument plant,
Equipment &system & To maintain the proper condition of tools, test equipment and workshop equipment.
• To properly document and accurately report all maintenance, repairs, overhauls adjustments and inspections.
• To train Subordinates on Instrument trouble shooting, Quality Management system, on minimizing breakdown
Maintenance in order to prevent production loss &To prepare Skill availability Matrix for measure skill competency.
• To Assist with post construction and pre start-up commissioning support activities.
a)Control System Handled:
• Hands on Exposure with following system with Detail Engg. of Sys. offer Evaluation, Procurement, FAT, SAT of
Sys. Installation, Commissioning & Maintenance Activities Including System Back Up/Modification , Hard Ware &
Software Addition/Deletion and Programme Uploading/Down loading.
• 1) DCS: Yokogawa CS 1000 DCS System With US FDA Software Validation Package & OPC Client Server S/W.
• 2) SLC / PLC: Allen Bradley -PLC 5/40C, SLC 5/04 & 1400e Panel View ,
Mitsubishi PLC - Mac 90 , Siemens -S200 PLC Sys. With OP7 MMI .
• 3) SCADA System: SCADA Sys. with Kepware & Mitsubishi Software's Along With Allen Bradley SLC 5/ 04 & HMI.
. 4) Communication System: EPABX System, PA/GA System, CCTV System
5) PLC Based Material Handling System – Conveyor belt system and storage vessels with bag filters
• b) Field Instrumentation:
• Conversant with Supervision of Loop checks, field calibrations, functional tests, cable tray works, cable trench
works, cable continuity/megger checks, termination/jointing techniques, Panel quality checks. FAT/SAT of Control
system & sub system .Maintain the records of test results and report.
• Hands on experience on selection, Testing, Calibration, Installation of different types of smart Transmitters for
Temp., pressure, Level, Flow measurement ,ON/OFF,PID Controllers (single & Multi loop Controllers) ,Data
Loggers/ Scanners, Manual Loaders, different types of Point contact Measuring Instruments (Field Switches).
• Hands on exp.of different types of Control/on-off valves including its selection/sizing through software.
• Familiar with different Pneumatic & Hydraulic systems & solenoids/Cylinders ,on/off & control valves
maintenance.
• Conversant with maintenance, calibration of Bagging Machines, weighing systems / scales, Weighbridges.
• Well familiar with performing Internal Auditing For ISO9001:2000, ISO-14001 & HACCP Quality systems.
• Familiar with preparing Root Cause Analysis for breakdown, to take necessary corrective action.
. Familiar with associated electrical designs like MCC, SLD, UPS design- installation-commissioning & maintenance.
________________________________________
Professional Experience-VII
SERVICE ENGINEER,
June 1996 - February 1997 USHA INFORMATICS, Sugam Appt., Ajit Nagar., India, Baroda, Gujarat

Job Responsibilities: Worked for Testing, Installation & Commissioning and service Activities of the Microprocessor based EPABX System and Servicing/repair of different types of Telephone Instruments.
________________________________________
Professional Experience-VIII
Trainee Engineer,
December 1995 - May 1996 TOPAK INDUSTRIES (I) LTD., Village: Samiyala., India, Baroda, Gujarat
Job Responsibilities:
To look after the Assembly, Testing and service support Activities for the Product Tea & Coffee Vending Machines which were based on complete digital control system for control of water level, Temperature, different motors on/off operation.

Specialties

SKILLS TO SUPPORT - •Effective Supervisory, Interpersonal relationship, Leadership skill. • Team working and conflict handling capabilities • Self-starting ability to work independently . .Committed to the Achievement of the company Goals. COMPUTER SKILLS - •Good working knowledge Microsoft Office Packages viz. MS Office - MS Word, MS Excel/ Visio, Power Point etc. •Conversant with PLC Programme Uploading/Downloading, Software changes/addition-deletion, System Back up.

Education

Academic Qualifications: B.E. (ELECTRONICS) Institute: Marathwada Institute of Technology, Aurangabad, Maharashtra state, India. A) PASSED Bachelor of Engineering (B.E.-ELECTRONICS) with FIRST DIVISION during August 1995 from Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, Maharashtra, India. B) PASSED DIPLOMA IN ELECTRONICS AND TELECOMMUNICATION ENGINEERING with FIRST CLASS from Board of Technical Examinations, Mumbai, Maharashtra, India during August -1991 and from same Institute.

Tags: FEED Brownfield EPCM Engineering Installation Offshore Gas Processing Detailed Design

This profile has been viewed 45 times

Contact this Candidate